Makro•Grip 5 axis Vices

Detailed Specification

External pre-stamping enables a workpiece to be held reliably in the Makro-Grip 5-Axis Vice with low clamping pressure. Deformation and distortion of the material during clamping are therefore excluded and wear on the clamping device is reduced to a minimum. Its compact design and the use of form-closure technology make the 5-Axis Vice ideal for 5-side manufacturing.

New in 2018, 11 years after the initial introduction of the original 5-Axis Vice, are developments to our Makro-Grip product line. Interaction between the clamping jaws and the vice body has been significantly improved. Along with a fresh, new look, the vice body has a reworked spindle centre-piece and new chip outlet. Along with “Conventional Workholding” these optimisations apply to all types of vices.

• Best accessibility and process reliability for 5-sided machining
• Highest holding power at low actuation forces through form-closure clamping
• Easly reproduction of clamping situation without using endstops
• Great handling characteristics due to low weight
• Integrated zero-point adaptation
• Available in base width 77 mm (jaw width 46 and 77 mm) and 125 mm (jaw width 77 and 125 mm)