Correa FOX Bridge Type milling machine
The FOX combines traditional roughing capacity with the speed and precision of high performance machining controlling…
Detailed Specification
Now IN STOCK, short delivery on Geminis GT5 G2 – 1200×5000
TECHNICAL DATA:
CAPACITY
Height of centres (mm) 615
Swing over bed (mm) 1200
Swing over cross slide (mm) 850
Distance between centres (m) 5
HEADSTOCK
Spindle bore diameter (mm) 104
Spindle nose DIN 55026-11
Spindle diameter at front bearing (mm) 150
Speed range I 0-175
Speed range II 0-350
Speed range III 0-700
Speed range IV 0-1400
Torque S1/S6 (Nm) 4000 / 4850
Main motor power S1/S6 (KW) 30 / 37
SLIDES
Longitudinal slide rapid traverse (m/min) 8
Cross slide rapid traverse (m/min) 8
Cross slide travel (mm) 600
Width of longitudinal slide (mm) 900
Width of transversal slide (mm) 400
TAILSTOCK
Quill diameter (mm) 160
Quill traverse (mm) 300
BED
Width guides (mm) 655
Height to the flat guide (mm) 800
WEIGHTS
Between centres(kg) 6000
On air (gravity centre at 250mm) (kg) 1200
Machine weight 1m (kg) 12000
Weight of each extra meters (kg) 1200
DTS (UK) Ltd's Products
-
-
CMZ TA20M
Capacity Max Swing over bed 760 mm Max turned diameter 600 mm Max turned length 400/640/1100 mm Max Bar…
-
* STOCK MACHINE * CMZ TD35 Y 1350
CMZ TD35Y Ex Stock Capacity Max Swing over bed 950 mm Max turned diameter 550 mm Max turned…
-
Heavy Duty Honor VL-200CM
Honor VL-200CM Heavy Duty Vertical Lathe, new to DTS in the UK. Heavy duty vertical lathes…
-
CMZ TTL 66-66
CMZ TTL 66 66 T1Y T2Y Capacity Max Swing over bed 240 mm Max turned diameter 320…
-
Correa Norma Bed Mill
In search of a large bed milling machine with a universal head for positional machining? Check…
-
5 axis VMC from DTS – 800mm X Axis
New 5 axis machine now available from DTS in the UK. This machine has an 800mm…
-
HONOR VL-125C
NEW HONOR VL-125C Max swing dia.: 1600mm Max turning dia.: 1600mm Max turning height: 1250mm Table…
-
Correa AXIA deal from DTS
The AXIA represents a pure box-in-box concept, combining an innovative ram droop mechanical system with a…
-
Knuth Heavy Duty Manual Lathes Ex Stock
Extra heavy, wide machine bed with heavy ribbing and one-piece mono-block construction. Induction-hardened and ground guide…
-
Correa Norma MG
NORMA MG | Unchallenged flexibility combining the rotary table live axis with the 0,02º indexing capability…
-
LITZ LU620 5 Axis Machining Centre
LITZ LU620 5 Axis Machining Centre: Heidenhain TNC 530i 12,000 RPM, HSK 63A Spindle, Linear Scales,…
-
Correa AXIA deal from DTS
Correa AXIA deal from DTS Table dimensions (mm) 6000 x 1200×900 Maximum load on table(Kg) 10 kg/m2…
-
***IN STOCK 2020***GEMINIS GT5 G2 – 1200 X 5000
Now IN STOCK, short delivery on Geminis GT5 G2 – 1200×5000 TECHNICAL DATA: CAPACITY Height…
-
LITZ LU620 5 Axis Machining Centre
LITZ LU620 5 Axis Machining Centre: Heidenhain TNC 530i 12,000 RPM, HSK 63A Spindle, Linear Scales,…
-
Correa Performer 2500
Correa Performer 2500, this machine is new and for sale from DTS. Great deal on this…
-
ON SHORT DELIVERY ! Johnford VMC 1600SHD Machining Centre
Heavy duty VMC utilising four Box slideways on the X axis. With Y axis travel of 1100mm. Travel…
-
Knuth Heavy Duty Manual Lathes Ex Stock
Extra heavy, wide machine bed with heavy ribbing and one-piece mono-block construction. Induction-hardened and ground guide…
-
5 axis VMC from DTS – 800mm X Axis
New 5 axis machine now available from DTS in the UK. This machine has an 800mm…
-
Geminis GM9 Multiprocess Lathe
Max Lathing Width 2000MM Distance Between Centres 1 to 14 Meters Through Hole Diameter 150mm Speed of…
-
Geminis GR5 Axle Machining
Swing Over Bed 1 Meter to 1.2 Meter Swing Over Cross Slide 600-800 Max Axle Length…
-
Honor Seiki VTL
VTL machines by Honor Seiki are available from DTS UK LTD. Range starts at the VL-46A to the…
-
CORREA FOX 50 Bridge Type Machine
You don’t often see machines of this size and specification ON SHORT DELIVERY. The Fox represents…
-
Stahlwerk – Taurus 300LM +
12 / 15 Inch Chuck 2 Meters Turning Length 610mm Swing over bed Mill / Drill…
-
Geminis GT 9
Geminis GT9 – G2/G4 Swing Over Bed 2 Meters / 2.4 Meters Swing Over Cross…
-
5 Axis Machining Centres from DTS
This Litz 5 axis has a large table and a large working envelope. You can be…
-
Geminis GT5 Flat Bed Lathe
Geminis GT5 G2/G4 Swing Over Bed 1 – 1.4 meters Over Cross Slide 650 – 1050…
-
Geminis GT 5 G2 1200×2000 mm Big Lathe
Short lead time available on this new GEMINIS GT 5 lathe. In build and ready to…
-
Correa Norma L
Correa Norma L travelling column machines available from stock – bed mills ideal for subcontract machining…
-
Correa Norma Bed Mills
In search of a large bed milling machine with a universal head for positional machining? Check…
-
Correa AXIA machines for total flexibility
Correa AXIA machines for total flexibility – The Axia is a new floor-type milling machine developed by Nicolás…
-
Honor VL-100
SHORT DELIVERIES…Honor VL-100 on short delivery, this machine has the following specification Max swing dia: 1200mm…
-
Johnford SL35 Lathe
It's ideal for chucking work, this machine comes with a bar feed, it's a 2 axis…
-
Johnford GT 395 Lathe – Big Turning Machine
The GT 395 Lathe from Johnford is a large turning machine, this machine has a…
-
Correa Anayak HVM-9000PC (USED) – Travelling Column Floor Type Milling Machine
TRAVELLING COLUMN FLOOR TYPE CNC MILLING CENTRE WITH FIXED BED, HIGH PERFORMANCE LINEAR GUIDEWAYS & FULLY…
Latest from DTS (UK) Ltd
-
The biggest Milling Machine at AMB
CORREA showcased the largest machine at the event – the impressive FOX Gantry machine! 🦊 Lyndsey…
-
Inside CMZ’s New Automated Plant for High-Accuracy Cylindrical Parts
Precitor, CMZ‘s latest plant dedicated to machining high-accuracy cylindrical parts, boasts over 2,000m² of temperature-controlled workspace…
-
That big machine!! That’s Bendalls…
Gary Strick speaks to Lyndsey at the MACH 2024 show about the purchase of a second,…
-
Correa FOX 60 from DTS UK: the largest machine at the show!
A universal head with patented technology and hirth coupling, 364 million positions, and continuous running at…
-
The largest subcontract machine shop in Europe
The WEC Group has just ordered four new CORREA machines following the company’s visit to the…
-
Now that machine is a MONSTER
Javier from CORREA discusses with Lyndsey the FOX machine showcased at the recent MACH exhibition. The…
-
Correa Live! at MACH 2024 with MTDCNC
Spanish machine tool specialist Nicolás Correa, in collaboration with its esteemed UK partner DTS UK, is…
-
The BIGGEST Machine at MACH 2024
Nicolás Correa Group to Showcase Groundbreaking Machinery at MACH Exhibition Spanish machine tool specialist Nicolás Correa…
-
CMZ Lathes: A New Era for UK Engineering
Struggling with machine longevity in precision engineering? Discover how DTS UK’s introduction of CMZ lathes is…
-
EX STOCK Turning Centre | 16 station turret, 1350mm between centres
Unlocking enhanced flexibility for manoeuvring through intricate and complex parts, a lathe equipped with a greater…
Subscribe to the MTDCNC Newsletter
Request a price
***IN STOCK 2020***GEMINIS GT5 G2 – 1200 X 5000
Detailed Specification
Now IN STOCK, short delivery on Geminis GT5 G2 – 1200×5000
TECHNICAL DATA:
CAPACITY
Height of centres (mm) 615
Swing over bed (mm) 1200
Swing over cross slide (mm) 850
Distance between centres (m) 5
HEADSTOCK
Spindle bore diameter (mm) 104
Spindle nose DIN 55026-11
Spindle diameter at front bearing (mm) 150
Speed range I 0-175
Speed range II 0-350
Speed range III 0-700
Speed range IV 0-1400
Torque S1/S6 (Nm) 4000 / 4850
Main motor power S1/S6 (KW) 30 / 37
SLIDES
Longitudinal slide rapid traverse (m/min) 8
Cross slide rapid traverse (m/min) 8
Cross slide travel (mm) 600
Width of longitudinal slide (mm) 900
Width of transversal slide (mm) 400
TAILSTOCK
Quill diameter (mm) 160
Quill traverse (mm) 300
BED
Width guides (mm) 655
Height to the flat guide (mm) 800
WEIGHTS
Between centres(kg) 6000
On air (gravity centre at 250mm) (kg) 1200
Machine weight 1m (kg) 12000
Weight of each extra meters (kg) 1200
DTS (UK) Ltd's Products
-
Correa FOX Bridge Type milling machine
The FOX combines traditional roughing capacity with the speed and precision of high performance machining controlling…
-
CMZ TA20M
Capacity Max Swing over bed 760 mm Max turned diameter 600 mm Max turned length 400/640/1100 mm Max Bar…
-
* STOCK MACHINE * CMZ TD35 Y 1350
CMZ TD35Y Ex Stock Capacity Max Swing over bed 950 mm Max turned diameter 550 mm Max turned…
-
Heavy Duty Honor VL-200CM
Honor VL-200CM Heavy Duty Vertical Lathe, new to DTS in the UK. Heavy duty vertical lathes…
-
CMZ TTL 66-66
CMZ TTL 66 66 T1Y T2Y Capacity Max Swing over bed 240 mm Max turned diameter 320…
-
Correa Norma Bed Mill
In search of a large bed milling machine with a universal head for positional machining? Check…
-
***IN STOCK ***GEMINIS GT5 G2 – 1200 X 5000
Now IN STOCK, short delivery on Geminis GT5 G2 – 1200×5000 TECHNICAL DATA: CAPACITY Height…
-
5 axis VMC from DTS – 800mm X Axis
New 5 axis machine now available from DTS in the UK. This machine has an 800mm…
-
HONOR VL-125C
NEW HONOR VL-125C Max swing dia.: 1600mm Max turning dia.: 1600mm Max turning height: 1250mm Table…
-
Correa AXIA deal from DTS
The AXIA represents a pure box-in-box concept, combining an innovative ram droop mechanical system with a…
-
Knuth Heavy Duty Manual Lathes Ex Stock
Extra heavy, wide machine bed with heavy ribbing and one-piece mono-block construction. Induction-hardened and ground guide…
-
Correa Norma MG
NORMA MG | Unchallenged flexibility combining the rotary table live axis with the 0,02º indexing capability…
-
LITZ LU620 5 Axis Machining Centre
LITZ LU620 5 Axis Machining Centre: Heidenhain TNC 530i 12,000 RPM, HSK 63A Spindle, Linear Scales,…
-
Correa AXIA deal from DTS
Correa AXIA deal from DTS Table dimensions (mm) 6000 x 1200×900 Maximum load on table(Kg) 10 kg/m2…
-
LITZ LU620 5 Axis Machining Centre
LITZ LU620 5 Axis Machining Centre: Heidenhain TNC 530i 12,000 RPM, HSK 63A Spindle, Linear Scales,…
-
Correa Performer 2500
Correa Performer 2500, this machine is new and for sale from DTS. Great deal on this…
-
ON SHORT DELIVERY ! Johnford VMC 1600SHD Machining Centre
Heavy duty VMC utilising four Box slideways on the X axis. With Y axis travel of 1100mm. Travel…
-
Knuth Heavy Duty Manual Lathes Ex Stock
Extra heavy, wide machine bed with heavy ribbing and one-piece mono-block construction. Induction-hardened and ground guide…
-
5 axis VMC from DTS – 800mm X Axis
New 5 axis machine now available from DTS in the UK. This machine has an 800mm…
-
Geminis GM9 Multiprocess Lathe
Max Lathing Width 2000MM Distance Between Centres 1 to 14 Meters Through Hole Diameter 150mm Speed of…
-
Geminis GR5 Axle Machining
Swing Over Bed 1 Meter to 1.2 Meter Swing Over Cross Slide 600-800 Max Axle Length…
-
Honor Seiki VTL
VTL machines by Honor Seiki are available from DTS UK LTD. Range starts at the VL-46A to the…
-
CORREA FOX 50 Bridge Type Machine
You don’t often see machines of this size and specification ON SHORT DELIVERY. The Fox represents…
-
Stahlwerk – Taurus 300LM +
12 / 15 Inch Chuck 2 Meters Turning Length 610mm Swing over bed Mill / Drill…
-
Geminis GT 9
Geminis GT9 – G2/G4 Swing Over Bed 2 Meters / 2.4 Meters Swing Over Cross…
-
5 Axis Machining Centres from DTS
This Litz 5 axis has a large table and a large working envelope. You can be…
-
Geminis GT5 Flat Bed Lathe
Geminis GT5 G2/G4 Swing Over Bed 1 – 1.4 meters Over Cross Slide 650 – 1050…
-
Geminis GT 5 G2 1200×2000 mm Big Lathe
Short lead time available on this new GEMINIS GT 5 lathe. In build and ready to…
-
Correa Norma L
Correa Norma L travelling column machines available from stock – bed mills ideal for subcontract machining…
-
Correa Norma Bed Mills
In search of a large bed milling machine with a universal head for positional machining? Check…
-
Correa AXIA machines for total flexibility
Correa AXIA machines for total flexibility – The Axia is a new floor-type milling machine developed by Nicolás…
-
Honor VL-100
SHORT DELIVERIES…Honor VL-100 on short delivery, this machine has the following specification Max swing dia: 1200mm…
-
Johnford SL35 Lathe
It's ideal for chucking work, this machine comes with a bar feed, it's a 2 axis…
-
Johnford GT 395 Lathe – Big Turning Machine
The GT 395 Lathe from Johnford is a large turning machine, this machine has a…
-
Correa Anayak HVM-9000PC (USED) – Travelling Column Floor Type Milling Machine
TRAVELLING COLUMN FLOOR TYPE CNC MILLING CENTRE WITH FIXED BED, HIGH PERFORMANCE LINEAR GUIDEWAYS & FULLY…
Latest from DTS (UK) Ltd
-
The biggest Milling Machine at AMB
CORREA showcased the largest machine at the event – the impressive FOX Gantry machine! 🦊 Lyndsey…
-
Inside CMZ’s New Automated Plant for High-Accuracy Cylindrical Parts
Precitor, CMZ‘s latest plant dedicated to machining high-accuracy cylindrical parts, boasts over 2,000m² of temperature-controlled workspace…
-
That big machine!! That’s Bendalls…
Gary Strick speaks to Lyndsey at the MACH 2024 show about the purchase of a second,…
-
Correa FOX 60 from DTS UK: the largest machine at the show!
A universal head with patented technology and hirth coupling, 364 million positions, and continuous running at…
-
The largest subcontract machine shop in Europe
The WEC Group has just ordered four new CORREA machines following the company’s visit to the…
-
Now that machine is a MONSTER
Javier from CORREA discusses with Lyndsey the FOX machine showcased at the recent MACH exhibition. The…
-
Correa Live! at MACH 2024 with MTDCNC
Spanish machine tool specialist Nicolás Correa, in collaboration with its esteemed UK partner DTS UK, is…
-
The BIGGEST Machine at MACH 2024
Nicolás Correa Group to Showcase Groundbreaking Machinery at MACH Exhibition Spanish machine tool specialist Nicolás Correa…
-
CMZ Lathes: A New Era for UK Engineering
Struggling with machine longevity in precision engineering? Discover how DTS UK’s introduction of CMZ lathes is…
-
EX STOCK Turning Centre | 16 station turret, 1350mm between centres
Unlocking enhanced flexibility for manoeuvring through intricate and complex parts, a lathe equipped with a greater…